Cables

For proper assembly. - Fits any Trek frame with open groove guide design - For specific compatibility concerns, please contact our Customer Service team

Hydraulic hose with banjo fitting for TRP brakes.

- Shimano, Y8JA98020, SM-BH90, Olive and connecting insert

SRAM OE replacement hose kits for SRAM and Avid hydraulic disc brakes. - Black Banjo Hydraulic Brake Hose Kit fits both SRAM road and mountain bike brakes that feature a black banjo fitting at the caliper - 2000mm black hose - Includes hose, 2 threaded barbs, 2 olives, 4 compression nuts, hose clips, and T8 Torx L-Key - Compatible with Level ULT, Level TLM (A1), Code R/RSC (B1), RED eTap HRD, S900 Monoblock

SRAM OE replacement hose kits for SRAM and Avid hydraulic disc brakes. - Double Compression Hydraulic Brake Hose Kit fits both SRAM road and mountain bike brakes that feature compression fittings at both lever and caliper - Hydraulic line kit is compatible with both DOT and Mineral Oil brake fluid brakes - 2000mm black hose - Includes hose, 2 threaded barbs, 2 olives, 4 compression nuts, hose clips, and T8 Torx L-Key - Compatible with AVID Code R, Elixir 1/3, Juicy 3, DB 1/3, DB8, Level ULT/TLM (B1), Level T, Guide RE, G2 RE/RS/R, S9002P (RED, Force, Rival-2P eTap AXS)

SRAM's Guide Hydraulic Line Kit is a replacement hose kit for all Guide brakes. - Compatible with SRAM Guide R, RS, RSC, and DB5 brakes - Length: 2000mm

Slick stainless cables undergo a polishing process to further remove imperfections. This creates a smoother surface with lower friction than PTFE-coated cables. With no coating, these are highly durable and compatible with all performance housings and lubricants. Typically used on high-end bikes, by riders wanting improved performance. Pro Polished cables eliminate the need for flaky coatings with an innovative polishing process to reduce friction and improve performance. - Polished stainless steel construction for low friction - Compatible with all performance housing and lubricants - Cables are tinted gold for easy identification

Jagwire's Sport Inline Adjusters are installed on your shift cable housing sections so that you can fine-tune the shift cable tension by hand (without tools). They're great for keeping your shifting dialed in. They're precision made of lightweight aluminum and nylon for easy use and durability. To install them, remove the cables and housing sections, cut the top housing sections in two and rejoin the sections with the Inline Adjusters in the middle.

Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - Slick cables are die-extruded for smooth operation - Pre-stretched - SRAM/Shimano mountain compatible cable end - Stainless steel construction resists corrosion - Single end cable features weld-cut for easy installation

Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.

Jagwire's Sport Slick Stainless Shift Cable is a high-quality shift cable made of stainless steel for excellent shifting performance, corrosion resistance and durability. It also comes in lengths to fit single and tandem bicycles.

Jagwire's Stick-On Cable Guides are made of lightweight aluminum with adhesive on the bottom. The aluminum lets them conform to any shaped frame tube and the adhesive holds fast. They come with Jagwire's C-Clips, nylon cable clips that snap onto the guides to hold the cables neatly in place. You get a pack of 4.

- Wire hook for electronic shift and brake housing - 2.5mm E-Shift + 5.0mm Brake

Improve the performance of your tandem drivetrain with fresh stainless cables coated in smooth Teflon for friction-free shifting. Longer than a standard shift cable, its length will get the job done for any tandem. Key features: - Compatible with all Shimano, SRAM, and Campagnolo systems - Smooth surface reduces friction and improves performance - Teflon cables are friction-free and rust-proof - Stainless steel cables are permanently rust-free - Length: 3000mm

- Pre-stretched, Teflon coated 19 strand inner wire - 1800mm length

Genuine replacement parts All the parts you need to keep your Boone fresh. For proper assembly. - For 2014-2018 Boone - For specific compatibility concerns, please contact our Customer Service team

Genuine replacement parts Keep your bike safe and operating as it should. Keeps your cables and housing under control. - Replaces any 5mm X 28.6mm headset spacer to improve cable housing management - Compatible with threadless forks only

Genuine replacement parts Original Trek Fetch+ 4 cable guides Original Fetch+ 4 repair part - Set of 2 cable guides (Left + Right) - To guide cables around the steerer tube

Genuine replacement parts For optimal functionality. Replacement steer cable mount for your cargo bike. - Mounts front brake cable - Fastener kit not included

Genuine replacement parts For proper assembly. For optimal integration. - 10 pack - For 22.2 - 31.8mm handlebars

Genuine replacement parts Securely holds hub motor power cable in place. Original equipment replacement parts for your ride. - See your bike's specific product page for compatibility - Includes mounting hardware

Get your cables under control. - Designed for use on Top Fuel 29 2020-2021 - Reversible to meet cable routing differences in Rock Shox vs. Fox shocks

For proper assembly. - Compatible with 2015-2017 Emonda SLR - Trek cable stops and guides

For proper assembly. - Original equipment replacement downtube covers for Trek Madone 9 Series frames - Not compatible with other bikes

For proper assembly. - Original equipment replacement front brake cable stop for Trek Madone SLR bikes - Not compatible with other bikes - For installation instructions, please see the Madone Assembly Manual

Shimano Dura-Ace BC-9000 Polymer Road Brake Cable & Housing sets reduce the sliding resistance to achieve lighter and quicker operation. - Dura-Ace grade SLR-EV Road brake cable set - Stainless steel for anti-rust protection - Low friction polymer material on the cable may cause slippage at the cable fixing bolt after initial pre-stretch for the cable is performed. Fur-like material from polymer coating will not affect the performance - Pre-lubed with special polymer compatible grease

Shimano EW-SD300 Di2 eTube Wire for external routing is available in a variety of lengths. - Compact design makes new electric components smaller and lighter - EP8 EP800 Series