Other

110-Series Alloy Interlok Headset Spacer - Aluminum construction

Disc brake mount adaptor. - Includes stainless steel adaptor and caliper bolts

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

KS Dropper Post Service Parts

KS Dropper Post Service Parts

Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Star Ratchet Spring

- Enough clamp bolts for 4 clamps

Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No

KS Dropper Post Service Parts

RaceFace Aeffect R Dropper Post Small Parts

Tools for repair and maintenance of RockShox Reverb suspension seatposts. - Specific to RockShox Reverb post

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Spacer Sleeve - 10.1mm, for 3-pawl

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Spacer Sleeve - 15.4mm, for ratchet

KS Dropper Post Service Parts

KS Dropper Post Service Parts

- Alloy construction - Great for Cruiser or BMX bar conversions

KS Dropper Post Service Parts

Flat Mount Disc Caliper Bracket Bolts

- Black carbon fiber weave headset spacers for tuning ride height - No logos - Includes one (1) 1-1/8" x 10mm spacer

- Black carbon fiber weave headset spacers for tuning ride height - No logos - Kit includes one (1) 1-1/8" x 20mm spacer

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240 Disc Ring Nut

Brake Pad Spreader Springs - Available for Guide Ultimate and Guide X0 brakes

Problem Solvers Bubs Frame Plugs to fill M5 bolt holes in your frame and fork. Replace water bottle and rack mount bolts for a clean look while keeping grit and moisture out of the inside of your frame. Protect your frame bag fabric from abrasion, or just take a little weight off your bike. - Fits most frame and fork M5 bolt holes - Shaves weight, saves threads, looks sleek - 10mm length - Rubber construction - Bag of 10

Keep the weight down and your headset snug with the Specialzied Carbon Steerer Tube Plug.

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

MSW Seatpost Clamps keep your saddle and seatpost from moving around while you’re out riding. Tough and dependable, they’re available in polished silver or black finishes, as well as four common sizes. - MSW Seatpost Clamp - 34.9mm, Black

The Problem Solvers Handlebar Clamp Shim allows you to fit almost any handlebars in almost any stem. It's machined of light and durable aluminum and grooved on the inside to hold tightly.

Saddle clamp heads and lowers for KS Dropper posts.

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

FSA Standard Headset Bearings

Our Seatpost Adapters quite literally fill the gap, and with over 25 sizes available, the combinations are endless. These Seatpost Adapters are compatible with static, suspension and dropper Seatposts.

Hose Kits, Barbs and Strain Relief for Servicing Reverb Lines.

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 3 Pawl Ring Nut

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

The Problem Solvers Double Chainring Bolts include 5 chainring bolts and nuts that are 8mm wide. This is the right size for most double-chainring setups. These chainring bolts are made of either aluminum, stainless steel, or chromoly.

The Problem Solvers Seatpost Shim is what you need when your seatpost is a little too small-diameter to fit tightly into your frame. It's made of light, durable aluminum and has a lip on the top so it won't slide down inside the frame during installation.

Switching frames doesn’t mean you have to switch posts! Use your old posts without worry with Problem Solver's wide variety of seatpost shims. -100mm long -3mm lip -Alloy Problem Solvers Seatpost Shims are not intended for use with carbon seatposts

The Problem Solvers Single Chainring Bolts include 5 chainring bolts and nuts that are 6mm wide. This is the right size for most single-chainring setups. These chainring bolts are made of either aluminum, stainless steel, or chromoly.

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

KS Dropper Post Service Parts

Electra's Townie Quick-Release Seatpost Collar offers a little extra bling and convenience to your Townie bike because it allows no-tools seat-height adjustment. This quality metal clamp is easy to install and use and it securely fastens your seatpost in place.

The Command Post SRL Clamp moves the Command Post's lever into the position where the front shifter would normally go, giving you more control. - Hinge clamp for easy installation. - Lightweight alloy clamp with steel bolt. - Lightweight alloy clamp with steel bolt.

This is a replacement for the stabilizer unit of your Shimano rear derailleur, also commonly called a roller clutch assembly. A functional stabilizer keeps chains locked onto single ring setups, and reduces chainslap, mis-shifts, and ghost shifting. - Fits XTR RD-M9000, XT RD-M8000, SLX RD-M7000-11

Cane Creek crown races are interchangeable between headset series. - Required to fit RockShox Bluto on SM and MD Beargrease Carbon frames - May be required to fit Manitou Mastodon Mukluk Carbon frames

Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 52mm lower headset bearings - Compatible with 30mm (1-1/8") straight steerer tubes - Lightweight aluminum construction - Allows the installation of a straight steerer fork without changing out the headset lower

Replacement lower hardware for Rockshox forks.

FSA bearings that set directly into the frame without the use of pressed in cups. - 36/45 degrees is Cane Creek-compatible - 45/45 degrees is Campagnolo-compatible

Aluminum headset stack spacers precision cut to ensure proper headset function. - Precision cut for proper function

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

The Problem Solvers Double Chainring Bolts include 5 chainring bolts and nuts that are 8mm wide. This is the right size for most double-chainring setups. These chainring bolts are made of aluminum and feature dual-hex heads for easy, secure installation.

A clean, effective look for mountain bikes with adjustable ride height seat posts. - Seat collar with integrated guide for the housing of adjustable ride height seat post. - Fits any frame with a seat tube OD of 34.9mm. - Weight: 24g

Get back on the road with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: 2-bolt

Get back on the trail with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: 1-bolt

RockShox 32mm Seal Kit

Shims for fitting 26.0mm diameter handlebars to 31.8mm clamp diameter stems. - Outside Diameter: 31.8mm - Inside Diameter: 26.0mm - Length: 44mm - Machined Aluminum - Anodized Black

Adapters to convert your flat mount fork to post mount calipers - FF-1 front 140mm rotor - FF-2 front 160mm rotor - FR-1 rear 140mm rotor - FR-2 rear 160mm rotor - Each includes two bolts