Pedals

Light, impact resistant. New for 2018 is the Synth Pedal. An injection molded, nylon reinforced platform that is light, impact resistant and won’t break the bank. Modeled after our Scarab pedal, the Synth features a large platform with true concave and our proprietary pin system. It uses the same high-end axle and bearing assembly as on our Scarab and Contact models so you can count on long-life and smooth performance, with common serviceability components available from Chromag.

- Injection molded, nylon reinforced platform that is light, impact resistant and won’t break the bank - Modelled after the Scarab pedal, the Synth features a large platform with true concave and our proprietary pin system - It uses the same high-end axle and bearing assembly as on our Scarab and Contact models - 15mm thick at platform centre, concave design - 110mm x 107mm

Your pedals like to be pampered. The Crank Brothers Pedal Refresh Kit gives you everything you need to keep them happy. Pedal Refresh Kit includes: -Enduro catridge bearings - Igus LL-glide bearings - Double seal system (internal and external seals) - Hex alloy end caps - O-rings - Nuts - Sleeve bushings - Bearing removal tool Compatible with the following pedals (2010-present): - Eggbeaters - Candys - Mallets - 5050s

Cleats with a more forgiving 10-deg release. - Optimized for novice riders or those new to clip-in pedals - 10-deg release angle makes it easier to unclip - 2-hole bolt pattern for mountain bike shoes - Plastic spacing shims included - Compatible with all Crankbrothers clip-in pedals

Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability. - SPD compatibility - Weight (pair): 30g - Float: 6 degrees - Release angle: 15 or 20 degrees

Minimal & lightweight for xc/trail riding. 4-sided entry enables superior mud shedding, and customizable float and release angles create a dialed-in feel. Specs: Spindle material: Forged SCM 435 chromoly steel Body material: Cast stainless steel Wing material: 17-4PH stainless Spring material: 300 series stainless steel Release angle: 15° / 20° Q-factor: 52mm Inner bearing type: Igus LL-glide bearing Outer bearing type: Enduro cartridge bearing Cleat: Premium brass cleats with shims included Weight: 280g per pair Warranty: 5 years

Size specific magnesium platform pedal provides optimal shoe/pedal interface. Details - Magnesium pedal body for weight reduction - Optimal surface area - Minimal body profile - 16mm thin - Concave pin profile & 10 adjustable pins per side for grip - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - Serviceable, pedal refresh kit found here Specs - Adjustable pins: 10 per side - Body material: AM60B Magnesium Alloy - Endcap: T15 - Footprint: 114mm x 111mm - Inner bearing type: Igus Bearing - Max rider weight: No restriction - Outer bearing type: Double Cartridge Bearing - Shoe size: US 10-15 // EU 43-49 - Spindle material: Forged SCM 415 Chromoly Steel - Warranty: 5 years - Weight: 386g per pair

Crank Brothers' Candy 3 pedals combine 4-sided cages for super-easy entry/exit with CNC'd aluminum platforms for low weight, great foot stability, and on-trail durability. The Candy 3s feature chromoly axles, stainless steel springs, CNC machined aluminum wings, and an open design that sheds mud fast, making them ideal for sloppy conditions and cyclocross. They're also enhanced with inner needle bearings and water-tight internals for consistently smooth pedaling.

Foot, meet pedal. Thanks to the Stamp, you two will be closely acquainted. After scrutinizing data from the outsoles of top mountain bike shoe brands, Crank Brothers discovered that two distinct surface areas can optimize the shoe/pedal bond through the whole range of shoe sizes. The result is the Stamp, a pedal with minimum profile and maximum concavity. Specifications: - spindle material: forged scm 435 chromoly steel - body material: forged 6061-T6 - inner bearing type: igus LL-glide bearing - outer bearing type: igus LL-glide bearing - footprint: 100mm x 100mm (small) / 114mm x 111mm (large) - adjustable pins: 10 per side - minimal profile: 11mm-13mm thin - stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - weight: 375g per pair (small) / 405g per pair (large)

- Strapless design is easy to engage without fully committing to the pedal - No special shoes required - Improves pedaling efficiency - Molded from unbreakable nylon - Please make sure your pedals have visible mounting points or a removable reflector for mounting prior to purchase - Includes mounting hardware. Note: metal plate may not be required during installation.

Eliminate cleat wear and improve walking comfort and safety with these Exustar cleat covers. - Compatible with Exustar cleat C01, C03, and C05 - Durable and flexible rubber - Can be used with either floating or fixed position cleats - Weight of only 14 grams/pair

Alloy platform pedals with molded pins. - Chromoly spindle - Powder-coated

- Alloy body - Replaceable screw-in pins - 9/16-inch chromoly spindle - Powder-coated

- Pedal Weight (pair): 352g - Size: 102 x 96 x 11 mm - Body Material: aluminum extruded / CNC machined - Spindle: CNC machined cr-moly - Pedal Bearings: EVO+ system - Pins: replaceable grip pins

The DELTA standard requires a rotational movement of the foot toward the outside or inside for disengagement. This function improves cyclist's safety; no body or bearing prevents disengagement toward the inside. Compatible with non-KEO LOOK pedals, their contact area is wide for optimal comfort. They also feature a memory positioner to aid when changing cleats. - Use: Road & Indoor Bike - Material: Polyacetal + PTFE - Lateral adjustment: 4mm - Longitudinal adjustment: 12mm - Weight (pair + fasteners): 75g

The KEO GRIP cleats closely resemble the KEO CLEAT model, yet they boast the added feature of a TPU layer on the shoe side which prevents the risk of cleats sliding on carbon soles. Their anti-slip surface on the pedal side offers extra safety and stability when walking. - Use: Road - Material: Polyamide + TPU - Lateral adjustment: 4mm - Longitudinal adjustment: 9mm - Weight (pair + fasteners): 68g

MSW Thump composite pedals feature a concave shape and tall pins to provide a "just-right" amount of traction--enough for the rigors of riding off-road--but with in-mold nylon pins to keep calves laceration-free on more casual rides. Balance doesn’t have to mean boring! - Tough nylon composite body with in-mold pins - Chromoly steel, 9/16” spindles, sealed cartridge bearings and nylon bushings - Platform size = 118 x 99 x 19 mm - Body: 18.5 mm thick with 2.5 mm of concavity for great control and comfort - Black - Made in Taiwan

Built to handle the rigors of riding off-road, the MSW Thump composite pedals with replaceable steel pins provide solid traction when the trail gets hairy. The concave shape combined with tall pins provide the perfect balance of comfort and traction for a range of applications meant to expand your horizon. - Tough nylon composite body with adjustable, replaceable steel pins - Platform Size = 118 x 99 x 19 mm - Chromoly steel, 9/16” spindle, sealed cartridge bearings and nylon bushings - Pin height: 3 mm out of the box. Remove the 2 mm washer under the pin head to convert to 5 mm pin height. - Body: 18.5 mm thick with 2.5 mm of concavity for great control and comfort - Composite pedal body - Black - Made in Taiwan

Everything you need to fully rebuild your OneUp Composite Pedals. KIT CONTAINS: - 2 CARTRIDGE OUTER BEARINGS - 2 INNER DU BEARINGS - 2 OUTER SEALS - 2 AXLE NUTS - 2 INNER CAPS - 2 END CAPS

The OneUp Composite Pedals features a huge (115x105mm) super grippy platform with 10 rear-loading steel pins per side to keep your feet planted on even the roughest of trails. With a weight of only 355g, they won't slow you down on the climbs. Designed from stealth rubber down and shaped with a subtle convex profile to provide you with more grip thanks to the pedal sitting in the natural arch of your foot. The thin leading edge chamfered design gives you maximum clearance to reduce pedal strikes and deflect off trail obstacle. FEATURES - 10 rear loading Steel pins / side, with Nyloc nuts - DU plus cartridge bearing axle system - Thin leading edge chamfered design to deflect off obstacles - Wide platform design for increased stability - Contoured shape provides ultimate connected feel SPECS - Weight: 355g - Platform Size: 115x105mm - # of Pins: 10 per side - Axle Material: Black chromoly steel - Height: 18.5mm (13.3 at the leading edge) - Pin to Axle distance: 108mm - Color: Stealth Black, Red, Blue, Orange - Body Material: Nylon Composite

The OneUp Aluminum Pedals features a huge (115x105mm) super grippy platform with 10 rear-loading hexagonal steel pins per side to keep your feet planted on even the roughest of trails. With a weight of only 365g, the OneUp Aluminum Pedals won't slow you down on the climbs. Designed from stealth rubber down and shaped with a subtle convex profile to provide you with more grip thanks to the pedals sitting in the natural arch of your foot. The ultra-thin design (only 8mm at the leading edge) gives you maximum clearance to reduce pedal strikes and deflect off trail obstacle. Clip Less, Ride More. When it s finally time to service your bearings, the unique cassette tool lock ring system makes re-greasing the bearings exceptionally fast and easy. FEATURES - 10 rear loading custom hexagonal removable pins per side for maximum grip - Ultra thin leading edge chamfered design to deflect off any obstacle - Fully sealed and serviceable design with built in bearing extractor - Wide platform design for increased stability - Contoured shape provides ultimate connected feel SPECS - Weight: 365g - Platform Size: 115x105mm - # of Pins: 10 per side - Axle Material: Chromoly steel - Height: 8.3-12mm - Pin to Axle distance: 112mm - Color: Black, Green, Grey, Blue, Orange, Red, Purple, OilSlick - Body Material: 6061-T6 Aluminum COMPATIBILITY - Currently, due to the deep counterbore of the crank arms, these pedals are not compatible with SRAM Carbon cranks. - These pedals are not compatible with crank boots without modification to the crank boots. We recommend removing crankboots before installation.

RaceFace Chester Pedal Pin Kit 20 Pins Black

Replacement pin set for Race Face Atlas and Aeffect pedals.

Here For The Party A party's just not a party until Chester shows up. This burly nylon-composite pedal is big on features, small on price, and fully ready to tear up some trail. A concave body, replaceable traction pins, and a cro-mo sealed axle are all representing. The Full Meal Deal A slim yet durable nylon-composite body is accented with a concave design, built-in traction treads and 8 replaceable traction pins per side. Not Just Another Axle Made to stand up to punishment, the durable sealed cro-mo axle rolls on a completely serviceable bearing + bushing set-up. Bling For Your Bike No build is complete without sick looking color-Coordinated pedals. Chester pedals come in multiple vibrant colors to choose from. Specs - Platform Height: 18.4mm - # of Pins: 16 SHCS hex traction pins per pedal (8 per side) - Platform L x W: 101 x 110mm - Axle Material: Chromoly Steel - Body Material: Nylon Composite - Material: Nylon Composite - Weight: 360g

- Thin platform, concave aluminum body with bottom loading pins. - Shorter spindle design shaves weight. - Thin concave platform - Reduced spindle length saves weight - Hex-head threaded pin design offers more bite for added security - Hidden / Grease access port for extended life - Platform size: 101x100cm - Cartridge bearings and DU bushings - 20 SHCS hex traction pins per pedal

The Best Of Both Metals The Aeffect pairs a thin, lightweight 6061-TI aluminum body with a cro-mo axel that runs our tried and true bearing and bushing set-up. Surefooted As A Mule You want traction? You got it. Bottom loading hex-head threaded pins give you all the bite and foot security you need. Your True Colors Shining Through Pick from three vibrant colors to compliment your build and your personal sense of style. Just don't choose wrong or they'll make fun of you. Get Up Stand Up Like a good trail dog, the Aeffect Pedal is most in its element on a flowy section of backwoods Nirvana. Designed with a smaller body, this strong, durable, rebuildable pedal is made to chase stoke all day long. Specs: - Axle Material: Chromoly Steel - Body Material: 6061 Aluminum - Material: 6061 Aluminum - Platform Height (MM):16.9 - # of Pins: 20 SHCS hex traction pins per pedal (10 per side) - Platform L x W (MM): 101 x 100 - Weight: 375g

Shimano's SPD cleats are perfect for all your SPD-compatible pedals. If your entry and exit isn't what it used to be, a cleat replacement is just what the bike doctor ordered.

Shimano's SM-SH56 Multi-Release Cleats disengage with less effort and in more directions than standard SPD cleats. - Not compatible with Shimano PD-M858 (XTR) SPD pedals

Shimano's SPD-SL cleats are perfect for all your SPD-SL-compatible pedals. Available in three models to suit your ergonomic needs, with fixed/0-degree, 2-degree, and 6-degree options. These cleats come as a pair and include all required mounting hardware. They are compatible with three-bolt cycling shoes. - 0° Float/fixed type = SM-SH10 - 2° Float/front center pivoting type = SM-SH12 - 6° Float = SM-SH11

Shimano's M520s are affordable clipless pedals that are easy to enter and exit, and built to last. They boast dual-sided Shimano SPD bindings, which make them perfect for mountain bikers or roadies who prefer wearing walkable shoes with recessed cleats. The bindings are adjustable for dialing in the perfect entry and exit tension, and they have an open, mud-shedding design that prevents clogging. Chromoly axles and sealed bearings add tons of durability. - 380 grams (pair)